Plastic casing for sliced ham
P lastic casing for sliced ham technical specification
Plastic casing for sliced ham is a multilayer barrier casing for round sausages requiring clean peeling after cooking.
Flat width: 45-230mm
Packaging: 1000m/roll or 30-40m/shirred stick
Thickness: 45 or 50um
Available formats: Roll, shirred, cut/clip/looped
Other application of AUSTLON
We have different product series, each kind of them is designed based on products requiring, such as fresh meat, For boneless meat at the wholesale level – barrier is critical. Our AUSTLON bags can keep the product fresher for longer in fact up to 4 months at chilled conditions! Ideal for export.
Every company you work with will say that focus on quality. But how we do this in IPE is like this:
We do it in 3 steps:
1.Production – All our resins are imported – it’s not because local resins are not good, but they are not CONSISTENTLY good. Whereas we understand that packaging cost only 0.5 cents, but the product inside our package costs USD50, so we are very careful with our resin choice, and we know that companies who order from us are placing their trust in us, and we never want to let them down. As mentioned before, all the technology we invest in is leading edge, and we are an innovative company.
2.Management – we have a rigorous QC program, and we use BRC as a guiding system in our management practice. It includes all areas of our production and management, and has both process and end control elements and we have protocols in place for all situations such as how we should handle production mistakes, how to handle scrap material etc. We have consistently achieved a grade, and 2018 we have been requested to do unannounced audit, which means inspectors do not have to give any notice and they can come at any time to inspect our factory and we will be doing what we are supposed to be doing.
3.Traceability – we have complete tracing recall system. On every single product we send you, it will have a batch number, and we are able to trace back fully to each worker, each line, each resin batch, all within 2 hours. In addition, we have ½ m retained sample from every single master roll being kept in our factory for up to 2 years, so if ever you come across any problems, and you are able to provide the batch number and carton number, we can take this sample and analyze to see what the problem is.
Of course, finally we have experienced sales staff who we call technical sales to help look after you.
Innovation and technology
Over 15 testing instruments right here on-site in our factory. We have invested over USD100, 000 in this lab, and normally if you go to SGS to do one test, it will cost over USD500, and we have all the same equipment here. If you work with us, you will have access to all these.